wireing plans

Doophone with Single Call Button
Krux
Posts: 2
Joined: Mon Jan 22, 2018 5:50 pm

wireing plans

Postby Krux » Tue Jan 30, 2018 11:33 pm

Hi,

could you share the wireing plans for the R26 with us?
I'm trying to connect an external doorbell, but i'm not sure how.

Thanks!

Dolf

Akuvox_Dora
Posts: 6
Joined: Wed Oct 11, 2017 11:26 am

Re: wireing plans

Postby Akuvox_Dora » Wed Jan 31, 2018 12:58 pm

hello
Could you share the application scenario of connection external doorbell ? It is for residents to open door from inside-room or for the visitors to require entry from outside ? The physical wiring of these two application scenarios is same like below screenshot shown, but the settings on the R26 website is different.
R26接线图.png
You do not have the required permissions to view the files attached to this post.

Pincho
Posts: 4
Joined: Sat Feb 10, 2018 8:51 pm

Re: wireing plans

Postby Pincho » Sun Feb 11, 2018 4:59 pm

Hi,

I have an Akuvox R26C.Now do I need a wiring diagram to connect an external doorbell and an electric door opener. Do I need a transformer?

Or does the Akuvox R26c supply the power?

Do I have to stop at the Akuvox what relay.

A circuit diagram would be great.

Akuvox_Dora
Posts: 6
Joined: Wed Oct 11, 2017 11:26 am

Re: wireing plans

Postby Akuvox_Dora » Mon Feb 12, 2018 2:02 pm

Hi Pincho,

The external doorbell and an electric door opener need power supply alone.
The attached picture shows the wiring solution in common usage. You can take for a reference.
Could you explain the application of connecting external doorbell ? for visitor use or the owner to open the door from the inside ?
You do not have the required permissions to view the files attached to this post.

Pincho
Posts: 4
Joined: Sat Feb 10, 2018 8:51 pm

Re: wireing plans

Postby Pincho » Mon Feb 12, 2018 10:59 pm

Thank you for the connection plan.

I have connected the R26c with POE s.switch.Mein router is the Speedport W724V.Und here I have set up via Lan 1, the Fritzbox as a Sip server.

Fritzbox has the ip 192.168.2.10

The speed haven has the Fritz box assigned the Ip over DHCP 192.168.2.13.

The R26 got the IP 192.168.2.2.

At the moment I try to set up the app Vbell.

I will order the Akuvox IT82 later.

I hope I get it when someone rings, the app shows me that.

Pincho
Posts: 4
Joined: Sat Feb 10, 2018 8:51 pm

Re: wireing plans

Postby Pincho » Wed Feb 14, 2018 12:47 am

I hope you understand me.
If someone presses the R26, there should be a gong
ring.
I have this gong
https://www.steckplatz.de/1-Stk-GONG465 ... LMQAvD_BwE


Return to “R26,R23”

Who is online

Users browsing this forum: No registered users and 1 guest